EPSON LQ 2550C DRIVER

When micro-adjust reaches the minimum or maximum adjustment point, the printer will begin to beep continuously. If you are still getting garbage, change the cable. What is the recommended duty cycle for the printer? Disconnect and reconnect the cable on the printer and computer. Since Windows is a graphic environment, the drivers are set to print unidirectional for better print quality. It parks the current paper choice out of the way, while positioning another for printing. The Print Manager or the printer driver usually causes the conflict in Windows.

Uploader:	Goltirn
Date Added:	17 October 2006
File Size:	18.11 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	58624
Price:	Free* [*Free Regsitration Required]

The printer will remember the TOF setting and will position the print head accordingly for the next page. Turn the printer back ON without reinstall the paper epspn the tractor unit. Select Properties, go to the Details tab, click on the Spool Settings button, and choose the option "Print directly to the printer.

File:Epson LQ operator - Wikimedia Commons

Make sure that the driver you have selected as your default printer is compatible. To use this feature, load the paper into the printer.

If either of these are selected, turn the printer OFF and manually eject the continuous feed paper. Epson's definition of a 25 percent duty cycle stands for the printer printing not idle for two hours per day based on an eight hour day at 22 days per month. Once the print head has sufficiently cooled down, the printer will resume the print job. Turn the printer back ON and try printing again.

Is there any way I can adjust the starting point of the print job? The following other wikis use this file: Does the optional cut-sheet feeder feed envelopes? If the file has been modified from its original state, some details such as the timestamp may not fully reflect those of the original file.

When I turn my printer on, the paper feeds through about one and a half pages, then stops.

Windows 7 64bit drivers for an Epson LQ-2550

Try a different cable, making sure that it is fully-shielded and preferably six-feet or less in length. Select the User Defined page size in your software application and try printing.

Select User Defined Size and make sure there is a dot in front of 0. If the problem still persists, have the printer taken in to be serviced. Power OFF your printer and computer.

UKT Support - Epson LQ Printer

No, there will not be a scanner kit available. How many colors are in the color ribbon? What is the recommended duty cycle for the printer?

It parks the current paper choice out of the way, while positioning another for printing. When printing, the paper feeds back to the top-of-form loading position. If you are still oq garbage, disable the Windows Print Manager. Summary [ edit ] Description Epwon LQ operator panel. If you are still experiencing problems after changing your cable, you may have a computer or printer port issue.

What do these mean?

Close the Control Panel and the driver installation is complete. If you are still having problems, repeat the above steps. What are the differences between the LQ and the LQ? This page was last edited on 25 Novemberat Why does the printer stop or epso in the middle of a print job?

If you decide to mask pin 31, use masking or electrical tape. Disconnect and reconnect the cable on the printer and computer. Why won't my printer print bidirectional in Windows?